UV DTF – Butterfly Alphabets

What is UV DTF?

Ultraviolet (UV) DTF Printing refers to a new printing method that uses ultraviolet curing technology to create designs on films. These designs can then be transferred onto hard and irregular-shaped objects and then peeling off the transfer film.

Dimensions: 3.5cm wide, height is different depending on letter

These are designed to fit 5cm circle acrylic keyrings.

Instructions for applying UV DTF prints:

1. Use a squeegee or scraper and firmly scrape the front and back of the UV DTF print to make sure the print has adhered to the transfer film
2. Clean your blank substrate/ tumbler with hot soapy water and air dry.
3. Check to ensure the wrap fits your mug
4. Slowly peel off backing from the transfer film. If the print has not adhered properly, repeat step 1.
5. Position the print on your mug – please ensure you position it properly as the wrap cannot be moved/ removed once applied
6. Use a vinyl squeegee or scraper to scrape over the print to remove all air bubbles
7. Gently peel off the transfer film

Care instructions:

1. Hand wash only, do not soak or put in the dishwasher
2. Let the UV DTF print cure for a minimum of 48 hours before using

Disclaimer

We understand that sometimes mistakes can happen while using our products. It is important to note that any issues arising due to user error will not be covered or compensated. We recommend that users carefully read and follow all instructions provided to ensure proper use of our products. If you are unsure about any aspect of our products, please do not hesitate to contact us for assistance. We cannot be held responsible for any damages or losses resulting from user error.