DTF – It’s Not A Dad Bod [stubby holder size]

Direct to Film or DTF is a process that transfers prints onto fabric using a heat press. No need to weed or layer to achieve a full colour image!

Stubby holder size prints are approximately 6.5cm-7cm wide

Instructions:

1. you must use a heat press – home irons will not provide the best results
2. temperature: 140c to 150c (302F tp 320F), 15 seconds
3. pressure needs to be heavy
4. cold peel
5. slowly remove film
6. repress for 5s to 10s (covered with teflon sheet/ baking paper)