UV DTF – Motel Keyring Size Prints

These adorable prints go perfectly with our motel keyrings (click here for motel keyrings link)

Most prints are approximately 3cm wide

Application instructions:

1. Clean the motel keyring with rubbing alcohol
2. Make sure the keyring is completely dry before applying
3. Peel backing away from print
4. Place print on keyring (make sure your placement is perfect before applying as the print cannot be re-positioned after applying)
5. Rub over print with your finger, then use a squeegee to remove any air bubbles
6. Slowly peel away transfer film
7. Let print cure for 24-48 hours prior to using

Disclaimer

We understand that sometimes mistakes can happen while using our products. It is important to note that any issues arising due to user error will not be covered or compensated. We recommend that users carefully read and follow all instructions provided to ensure proper use of our products. If you are unsure about any aspect of our products, please do not hesitate to contact us for assistance. We cannot be held responsible for any damages or losses resulting from user error.